Honeywell Microclip – Monitor up to four gases

The handy and compact Gas Alert MicroClip XT multi-gas detector protects you from dangerous gases. It detects explosive gases, oxygen deficiency, carbon monoxide and hydrogen sulphide. The device is particularly robust and yet very handy and light. The housing is waterproof. Its protective cover also protects it from mechanical damage.

Thanks to IntelliFlashTM, you can always be sure that the appliance is working perfectly. As long as the control LED is flashing, everything is in order.

It is operated with just one button. This is very simple and minimises the training required for users.

The Gas Alert MicroClip XT can be connected to the MicroDock II test and adjustment unit for maintenance.

Get non-binding advice now

Quick navigation:
Specification | Sensor specification | Downloads

Gas alert MicroClip XT specification

Dimensions	11.3 x 6.0 x 2.9 cm
Weight	171 g
Temperature	-20°C to +58°C
Humidity	0 to 95% r.H. (non-condensing)
Alarming	Vibration, optics, acoustics (95 dB), pre-alarm, main alarm, short and long-term exposure, OL (overrange)
Testing	Test of optics and acoustics during commissioning, test of sensors, battery and electronics continuously
Power Supply	Lithium-Polymer battery = operating time ~ 10 hours (charging time < 3 hours)
User Options	Function Check Signal	Detection of explosive gases (% LEL or Vol.% Methane)
	STEL Interval configurable	User-configurable test gas concentrations
	Sensor (on/off)	Mandatory function test when due
	Lockout alarms	Adjustment mandatory when due
	Display mode ‘safe’	Alarm confirmation pre-alarm
	Stealth mode	Language selection
	Calibration lock	User-defined message at startup
	Automatic zero adjustment for toxic and explosive gases at startup	Automatic O₂ adjustment at startup
	Function test interval
Protection Class	IP 66/67, EMC/RFI in accordance with 2004/108/EC
Certifications and Approvals	CSA	Class 1, Div. 1, Gr. A, B, C, D
	Marine	American Bureau of Shipping
	ATEX	CE Ex II 1 G Ex ia IIC T4 Ga
	IECEx	Ex ia IIC T4 Ga
	CE	EU Conformity
Warranty	2 years including sensors

Sensor specification

Gas	Measuring Range	Display
H₂S (Hydrogen Sulphide)	0-100 ppm	1 ppm
CO (Carbon Monoxide)	0-500 ppm	1 ppm
O₂ (Oxygen)	0-30.0 Vol.%	0.1%
Explosive Gases (EX)	0-100% UEG0-5.0 Vol.%	1% 0.1%
The alarm thresholds can be configured by the user. All configurations are automatically displayed upon commissioning of the device. Higher resolution for H₂S is optionally available.