Honeywell BW Ultra multi gas detector – Four or five gases can be measured

The standard version of the BW Ultra measures four gases simultaneously. It can be expanded to five gases by adding an additional sensor. It not only protects you while working in hazardous areas, you can also measure areas potentially contaminated by hazardous substances.

Together with a float probe, the built-in pump can also draw in water from flooded areas.

Get non-binding advice now

Quick navigation:
Properties | Technical data

Properties

Simple operation

Tamper-proof on – button operation
Large LCD symbols
Easy maintenance

Clear display

A large dot matrix makes it very easy to read the measured values
Clear visualisation of gases and measuring ranges
An additional “Hole Watch” function enables quick trend detection
Intelli – Flash and Reverse Intelli – Flash signal the status of the device

Robust construction

The housing has been reinforced with a honeycomb structure and is therefore extremely robust
Scratch-resistant materials were used

Network capability

Compatible with the “Connected Worker” network
“Touch Connect” technology ensures simple network access
“Safety Suite” helps with the programming of parameters

Wearing comfort

Ergonomic design
Low weight

Reliability

Fast response
Sensors with heartbeat monitoring
Clear display
Maintenance and management via Intellidox system

Contact us

Technical data Honeywell BW Ultra

Use	Personal protection
Gas type	Measuring range	Measuring principle	Resolution	Fine resolution
Flammable gases	0 – 100 % UEG	Catalytic	1 % UEG, 0,1 % vol	–
Oxygen	0 – 25 % vol.	electrochemical	0,10%
Carbon monoxide	0 – 2000 ppm	electrochemical	1,0 ppm	–
Hydrogen sulphide	0 – 100 ppm	electrochemical	1,0 ppm	0,1 ppm
Hydrogen	0 – 2000 ppm	electrochemical	5,0 ppm	–
Sulphur dioxide	0 – 100 ppm	electrochemical	1,0 ppm	0,1 ppm
Chlorine	0 – 20 ppm	electrochemical	0,1 ppm	0,1 ppm
Nitrogen dioxide	0 – 50 ppm	electrochemical	1,0 ppm	0,1 ppm
Carbon dioxide	0 – 50.000 ppm	infrarot	100 ppm	–
Ammonia	0 – 100 ppm	electrochemical	1,0 ppm	0,1 ppm
Hydrogen cyanide	0 – 100 ppm	electrochemical	1,0 ppm	0,1 ppm
Nitrogen oxide	0 – 200 ppm	electrochemical	1,0 ppm
Chlorine dioxide	0 – 1 ppm	electrochemical	1,0 ppm	0,01 ppm
Ozone	0 – 1 ppm	electrochemical	1,0 ppm	0,01 ppm
VOC	0 – 1000 ppm	Photoionisation	1,0 ppm	–
Operation	Illuminated alphanumeric display, menu-guided operation via buttons
Configuration	The device is supplied already configured. The user can change the factory settings.
Memory	Data storage over 45 8-hour shifts, max. 30 alarm messages, max. 10 function messages
Housing	Particularly resistant plastic. Antistatic in accordance with EN 50014
Dimensions	148 * 85 * 40 mm
Weight	411 g with clip
Protection class	IP 66 / 68
Operating temperature	-20 – +50°C
Humidity	5 to 95 % r. h. non-condensing
Alarms	Vibration, visual and audible (95 dB). Pre-alarm and main alarm, short and long-term value exceedance, overrange
Self-test	Automatically every 24 hours: Sensors, electronics, all alarms, battery
Energy supply	Li – Polymer battery. Capacity 18 h (with PID or IR 14 hours) at -20°C
Pump	Electric pump module, integrated. Suction from max. 22.9 m
Authorisations	ATEX: EEx ia IIC T4 Ga, IECEx: Ex ia II C T4 Ga, CE: EU conform
Scope of delivery	Operating instructions CD and print, stainless steel clamp, battery, charging station, gas adapter
Accessories	see below
Guarantee	36 months including sensor, except NH₃ – 24 months, PID and Cl₂ 12 months